Pulley Type Continuous Wire Drawing Machine
 Structure:he drawing equipment consists of main reduction box, die casing, wheel frame, wire brace and electeical control system. The spinning drawing blocks are driven by JZT or Y series motor, with gear coupling runs changeful gears to reduce speed. The drawing blocks are verticaly fixed in sealed box body. The gear are lubricated with oil.
In order to lower residual heat on the surface of the block, the cooling means is installed in interwall of the block.
The machine runs with carwl or linkage. The safety halt gear is installed by the position of operating block.
Major Technical Parameter
| Specifictions Model |
800 |
560 |
450 |
350 |
| dia of takeup wheel (mm) |
800 |
560 |
450 |
350 |
| Draw die |
1--8 dies |
1--6 dies |
1--7 dies |
1--6 dies |
| Max.incoming diameter (mm) |
10--14 |
6.5 |
3.4 |
2.5 |
| Outgoing diameter (mm) |
6 |
2 |
1 |
0.75 |
| Total compressibili (%) |
- |
78--88.5 |
78 |
78 |
| Average partial compressibility (%) |
25 |
30 |
20 |
21 |
| Drawing speed (m/m) |
/ |
245 |
346 |
200 |
| Motor power (kw) |
132 |
60-80 |
30-45 |
18.5-22 |
| Overall dimensionssss (mm) |
9730x3340
x2020 |
1700x1150
x1750 |
1520x810
x1700 |
1400x800
x1500 |
| Weight (kg) |
4500 |
2000 |
1500 |
1000 |
Straight Type Wire Drawing Machine:
 We can supply PID wire drawing machine with high property and high reliability.
Applied for making of steel strand wire, steel rope wire, welding wire, stainless steel wire, umbrella stranded wire, PC steel wire, etc.
Features: High speed, high efficiency, low cost, low energy cost, simple operation, highly automatic. Can be assembled freely to meet your specific requirements.
The product is adequate for steel cord yarn, wheel rim steel wire, rope manufacturing steel wire, gas-protection welding wire, stainless steel wire, steel wire for umbrella ribs, and PC steel wire, etc.
Major Technical Index:
Specification |
Wire Drawing Times |
Max. Taking-in Wire mm |
Max. Finished Product mm |
Motor Power kw |
Speed m/s |
Noise BA |
400 |
6—10 |
3 |
0.75 |
11—15 |
18 |
81 |
560 |
6—10 |
6.5 |
1.40 |
22—45 |
16 |
83 |
Water-Trunk Type Wire Drawing Machine
We can supply two types of water trunk type drawing machine, one for medium size and another for fine wires. The cylinder is tower wheel type that enables high speed, efficiency and small occupation of space.
The main technical parameters are as follows: A. Feeding wire diameter: φ8-6.8MM
B. Outgoing wire diameter : 3.0-2.6MM
C. Drawing times: 8 Die
D. Electric motor power: 75-90kW
E. Speed :320 - 360M / min
F. Speed fixing wheel diameter : φ360MM
G. Productivity per hour: 1000-1200kg / n
H. Annual output : 4000T
I. Occupied land area: 15000 x 2500 × 2000 (length x width x height)
The main technical parameters:
| Specifications |
Reel diameter mm |
Wire drawing time |
Feeding wire strength MPa |
Maximum feeding wire diameter mm |
Maximum outgoing wire diameter mm |
Speed m/s |
Motor power kw |
| 550 |
550 |
11 |
≤1100 |
5.50 |
2.80—2.20 |
4 |
90—132 |
| 450 |
450 |
11 |
≤1100
|
3.60
|
1.60—1.40
|
6 |
75—90 |
| 350 |
350 |
12 |
≤1100
|
3.00
|
1.00
|
7 |
37—45 |
| 300 |
300 |
18 |
≤1050 |
2.60 |
0.8 |
8 |
30—37 |
 Inverted Wire Drawing Machine
Applied for: Drawing of low, medium and high carbon steel wire, stainless steel wire, prestressed steel, alloy steel wire, etc.
Main Technical Parameters
| Specification |
Wire Coiling Reel Diameter mm |
Drawing Times |
Compression rate % |
Maximum feeding wire diameter mm |
Drawing speed m / s |
Motor power: kw |
Transmission box |
| 550 |
550 |
1 |
20—25 |
6.50 |
1.30 |
15—18.5 |
Cycloidal gear speed reducer |
| 650 |
650 |
1 |
20—25 |
8.00 |
1.25 |
18.5—22 |
| 750 |
750 |
1 |
20—25 |
12.00 |
1.20 |
18.5—22 |
| 850 |
850 |
1 |
20—25 |
14.00 |
1.00 |
30—45 |
|
